Feima Robotics Pocket3D: Portable 3D Reconstruction System

Pocket 3D is a compact handheld reality-capture system that combines a 16-channel LiDAR scanner with a panoramic camera. It records indoor and outdoor spaces as point clouds, panoramic images and 3D Gaussian Splatting (3DGS) models. The scanner weighs only 700 g without the camera, so one operator can carry it and scan with one hand. It captures 48,000 points per second over a range of up to 100 m. Relative accuracy is 2 cm at 60 m, and absolute accuracy is 5 cm under typical conditions.

The scanner is controlled from a phone with the SLAM GO app for iOS and Android. The app shows the point cloud live during scanning, so coverage can be checked on site. Pocket 3D works with the DJI Osmo 360 and the Insta360 X4, X4 Air and X5. The camera mounts without any cables, and the app starts and stops both devices together. A replaceable SP20 battery provides about 3 hours of runtime. The unit operates in temperatures from -20 °C to 50 °C, and all components pack into the supplied soft carry case.

User Guides

Pocket 3D _User Guide ENG

 

After scanning, the data is processed on a Windows computer with SLAM GO POST Pro. The software produces point clouds, colourised point clouds, panoramic images and 3DGS models. It also exports open data for third-party software, such as mesh modelling. Pocket 3D suits surveying and mapping, site documentation, visualisation and digital twins. The panoramic camera and a USB-C PD charger are not included, and the camera needs a one-time calibration before first use.

 

Bundled Software.

Pocket 3D works with two free companion applications. SLAM GO runs on a phone and controls the scanner in the field. SLAM GO POST runs on a Windows computer and processes the captured data.

SLAM GO POST (Windows)
Desktop software from Feima Robotics for processing Pocket 3D data. It produces colourised point clouds, panoramic images, odometry and 3DGS models, and exports data to third-party software for mesh modelling.

  • System: 64-bit Windows 10 or 11, at least 50 GB free disk space
  • CPU: x86_64 with AVX2 support (recommended: Intel 13th generation, 8 cores)
  • GPU: NVIDIA only, CUDA driver 561.17 or higher (minimum RTX 2060; recommended RTX 4060)
  • 3DGS: NVIDIA 30 series with 8 GB video memory minimum (RTX 5070 with 12 GB or more recommended)
  • Memory: 16 GB minimum, 32 GB or more recommended

Stonex and 3rd party software

SLAM GO App (iOS and Android)
Mobile app that activates and controls the scanner, connects the panoramic camera and shows the point cloud live during scanning. It also records control points and supports firmware upgrades.

  • iOS: iPhone 11 or newer, latest iOS, “Maximum Compatibility” turned on in Personal Hotspot
  • Android: Android 10 or higher (Android 13 recommended), Snapdragon 865 or higher, 8 GB RAM, 64 GB storage
Laser Scan Performance System Specification
Maximum range 100 metres Storage 64 GB TF (microSD) card supplied, supports up to 256 GB
Minimum range 0.15 metres Control SLAM GO app (Android/iOS) or onboard button
Range at 10% reflectivity 30 metres Communication Wi-Fi, Bluetooth, USB-C
Relative accuracy 2 cm at 60 m Processing software SLAM GO POST Pro (Windows)
Absolute accuracy 5 cm (typical conditions) Mounting 1/4-inch threaded hole on the base
LiDAR channels 16
Points per second 48,000 Power Specification
Scan frequency 10 Hz Power consumption 7 Watts
Field of view 360° horizontal × 40° vertical Operating time Approx. 3 hours per battery
Battery SP20 intelligent battery handle, replaceable
Camera Performance Capacity 2450 mAh
Cameras External panoramic camera (not included) Charging USB-C PD, 20 V, 30 W or higher recommended (charger not included)
Supported cameras DJI Osmo 360; Insta360 X4, X4 Air, X5
Camera connection Wireless control via SLAM GO app, no cable required Physical Specs.
Camera setup One-time calibration required Weight 700 g (without camera)
Point cloud colouring Post-processing in SLAM GO POST Pro Size 127 mm × 105 mm × 223 mm
Operating temp. –20°C to +50°C
Operating humidity < 95% relative humidity

Point Clouds Captured with the Poket 3D

Gaussian Splat Examples from thePoket 3D

The Feima Robotics Pocket 3D supports a streamlined 3D visualisation workflow by creating Gaussian Splat models directly from its SLAM-based point-cloud data. When paired with a DJI Osmo 360 or an Insta360 X4, X4 Air or X5 panoramic camera (purchased separately), the scanner produces immersive, photorealistic 3D scenes suited to digital twins, site documentation and visual inspection.

The workflow is completed entirely within the SLAM GO POST Pro software, with no third-party software required:

  • Capture the SLAM point cloud with the Pocket 3D while the mounted panoramic camera records 360° imagery
  • Copy the scan project and camera recording to a Windows computer
  • Train and generate the Gaussian Splat model directly in SLAM GO POST Pro using One-click Solve
  • Review the final splat in the built-in 3DGS viewer

The result is a highly realistic, spatially accurate 3D representation that combines SLAM-derived geometry with rich panoramic imagery. Processing requires a Windows computer with an NVIDIA graphics card, and the one-time camera calibration must be completed before the first scan. Below are several Gaussian Splat examples produced with the Pocket 3D, showing the visual quality achievable with this workflow.

 

Price: $2,480 ex GST

Included in the price:

  • Pocket 3D scanner body
  • SP20 intelligent battery handle and base
  • 64 GB TF (microSD) card (pre-installed)
  • Camera mounting hardware
  • USB SD/microSD card reader
  • Wrench set and extra magnetic circle
  • Charging cable
  • Soft carry case
  • Quick Start Guide
  • Inspection certificate
  • SLAM GO mobile app and SLAM GO POST Pro desktop software

Not included: panoramic camera (DJI Osmo 360 or Insta360 X4, X4 Air, X5) and a USB-C PD charger (20 V, 30 W or higher recommended).